NRG InnovationsNRG-FRP-302RD-ULTRA Prisma Fixed Back Bucket Racing Seat W/Bottom Mount, Washed Up Light Red Seat/Gold Sparkle Back

Comfortable and came together easy (if you already know how to build a sim racing rig).The slider bracket that's sold separately is the thing that will screw your build up as it is pictured wrong in it's display picture and has to be installed a completely different way. I already have a seat with a slider for a reference so I just copied that method of installation and it went together perfectly.People complaining about the seat not lining up properly don't realize that the slider pull bar is like a spring and it's putting tension on both sides in opposite directions. You have to screw one side down to the base, tighten that side's screws fully, then pry the other side with a pry bar (or just a longer flat head screwdriver) to line up that side for tightening.Steps for install:1) Measure the width of the brackets2) Align the tracks on the rig to the width you just measured..3) Remove the brackets from the sides of the seat4) Screw the brackets into the seat slider attachment5) Adjust the seat sliders to the rear to expose the front mounting holes and attach to the tracks of the rig6) Adjust the seat sliders to the front to expose the rear mounting holes, attach the rears to the tracks.7) Make sure the tracks of the rig are fully tightened down8) Attach the seat slider bar and make sure it fully works9) Attach the seat to the seat brackets.(FYI if you bought the NRG seat slider, the display picture is upside down and the slider bar is on backwards. I already have a seat with a slider on my rig so I just copied that. The flatter/thicker side of the slider is what attaches to the seat bracket and the silver bar with the 2 pins for the slider bar goes towards the front of the seat)

In love with this chair feel so nice great value and the color is perfect,,, the build quality is great no issues nor marks … everything was easy to put on and setup on my rig

Was a bit worried on the mixed reviews. But mine came two days early and it was in a nrg box. Everything seemed legit and I didn’t have any problems there. I thought the large just based off what others said and I’m glad I did. I am 6’ 2” 230 and my waist is roughly 36-38 but I’d say at most a 40 may fit but it would be a bit tight.

Im 6'1" 235 lbs 36 inch waist jeans and a little thick around the middle. I went for the large size in blue. I fit in the seat fine but you might be really tight if you are much bigger in the hips . the seat has broken in a bit with a few weeks of drive time and gotten more comfortable and comes with side brackets and some hardware. the seat is stiff and always for good driving position and gives good support when getting on stiff 100kg loadcell brake. the bottom pad can be a little stiff after a few hours of continuous driving but has gotten better as the seat has started to brake in. the cove material is soft and comfy and looks good the sparkle back is a little extra imho but my gal loves it. as this is a true bucket seat it can get a bit hot and sweaty as there is little to no airflow because it cradles so close to your body so a fan or ac is a great idea. pretty much all racing bucket seats are this way. they are designed to keep you in place and help drive fast, deal with loads and keep relatively comfortable while doing so.I would not recommend putting in actual car especially if you plan on tracking it due to the fact it is not fia certified and can't for sure be deemed crash safe. and wont pass tecbottom line if you are looking for a bucket seat for yoour sim look no further as you save a ton over an fia certified seat of similar style and construction and will fill this roll perfectly.unless you are trying to 1-1 your actual car setup for training where if you have the extra dough laying around i would put in another of your actual race seat ( if your actual seat is a few years old and out of fia cert take it out and put it in your sim then new one in the car) for fiberglass seats the fia cert is generally 5 years from date of manufatuing so be wary of this and go somewhere in person or email and ask for most recent if buying a seat though mail to get most recent seat so you can get full life in your racecar.

The seat showed up double-boxed in great condition. I installed this onto an NLR GTElite cockpit, and it fits very well. The NRG mounting brackets were slightly bent on one end, but I used the mounting brackets that came with my cockpit and didn't have any issues. If you don't have a spare set of seat brackets, it's a good idea to get one in hand, just in case.The seat itself is spacious and wide. I have 22-inch shoulders and am a bit bulkier. This seat fits very well, and the bolstering isn't so aggressive that I feel squeezed into place. The cushioning also feels adequate, and my rear end hasn't complained during longer sessions. The color of the red seat cover matches the photos as well.I've read that these and other NRG seats on Amazon are likely to be copies or factory rejects from the manufacturer, and some have experienced warping issues or other damage. Thankfully, my seat seems to be in great condition, but I'd be cautious when ordering this seat. This is a good deal for a bucket seat, but be sure to inspect for any damage.

packaging was fair , Seat is great