Evolution Power Tools F165CCSL Circular Saw Multi-Material Cutting, Cuts Wood, Metal, Plastic & More, Parallel Edge Guide Included, 45˚ Bevel Capacity, 1200W, 165mm TCT Blade Included (230V)

Been a great addition to my tool collection. Powerful & easy to use. Fairly light & sharp blade.

I bought this as a DIYer... Not a pro. I was building some built in furniture. Obviously, I needed accurate lines for specific measurements. This did the job extremely well. Easy to cut straight, accurate lines. I'd buy it again no problem. It has outperformed other models from other brands I have used in the past. Well worth it 👌

This saw is absolutely fantastic!The Green Evolution Fury range (as opposed to the more serious orange handled Evolution "Build" range) are intended for the DIYer rather than for a tradesman but with this saw you are still getting a serious bit of kit. For the price it is a bargain and it is hard to believe that, yes, it DOES really saw through all of those different materials - wood, metal, plastic, embedded nails, etc. With the additional diamond wheel disc it will also cut through marble, granite and stone as well! You do have to keep reminding yourself that it actually is OK to do what you are doing with the saw as it seems so starnge at first to be able to cut through everything with a circular saw.Build quality is good, handling of the tool is excellent. The main difference between this version and the orange "Build" model is the depth of cut and the thickness of steel in particular which can be cut through. If this is important to you then check out the other model version - I think they are both excellent. (I have the orange version as a fixed Chop Saw so know what that one can do!)

It did the job I needed it for, the guide was useless as it wasn't big enough for what I was cutting. The saw itself though was good, easy to use. I don't think it will hold much cuff for industrial use though, but for around the house job, worth it.

Brilliant little saw, well made and robust, the only fault I can find is the clamp for adjusting the depth is plastic and I think it will not last the everyday use around the workshop, we shall see!I will give an update in a couple of months time.Update: From 4 stars to 5 starsThis saw has a brilliant blade as standard, what I didn't expect or read from the description of the saw is that the blade has a 2mm kerf and produces a fine saw cut. I have just trimmed 2mm off the top of a pair of 48mm Iroko garage doors (they were binding) and a 3mm raked cut to the bottom (also binding), and the saw went through them like butter, very very impressed for a small saw, I have a Bosch saw which has not done an awful lot of work and packed up with a electrical fault and in my opinion is not in the same league as the Evolution. As for the plastic adjusting screw for the depth, it is more robust than I first thought and needed not worry to about, go ahead and buy this saw, you won't regret it.

Light weight, good quality, good blade

The quality is excellent, it's well-crafted, and the price is fantastic. I'm very satisfied with it.

I bought this as I was looking for a general all purpose saw for up cycling some old doors and left over lumber.This Evolution Fury takes it all in it's stride and hasn't choked once.It's not the gentlest of cuts - but the F185-TCT multi-purpose blade has made short work of anything I've needed to resize so far.The saw itself is well balanced and feels capable - the 1200 watts give the blade loads of torque - it does't lack for power.Plunge cuts are doable and it also cuts up to a 45 degree bevel / tilt.I've found the adjustments and guides the least substantial thing about this saw.If control of depth and cutting at 90 degrees are paramount the lightweight material used for the guides and the plastic knobs don't inspire great confidence.However to be fair, they stayed where they were put and at this price point the Evolution is a fantastic saw.

Muy contento con la compra.

Das beste was ich mir je gekauft habe,Super Handliche Kraftvolle Säge die wirklich alles sägt.Sehr empfehlenswert.Vielen dank für so ein Tolles Produckt

Cette scie est impressionnante. Je l'ai utilisée de nombreuses heures pour de la découpe de bois et quelques palettes pour récupérer du bois. Elle "avale" les pointes sans problème et la lame coupe toujours aussi bien. Elle est facile à régler, facile d'utilisation. Je la trouve légère ce qui est un avantage quand vous devez l'utiliser de nombreuses heures. Le seul défaut, si on doit considérer ce point comme un défaut, c'est l'éjection de la sciure. Il arrive parfois en fonction du type de bois coupé que la sciure s'évacue assez mal et il y a un bourrage au niveau du protège lame. Les autres modèles, même professionnel ont parfois ce souci (rencontré avec une Makita). Donc je conseille cette scie circulaire qui me semble être une excellente acquisition.

Elle coupe super bien, l'aggloméré hydro de 2cm d'épais est coupé comme du beurre, rien à voir avec la vie d'avant, celle avec juste une scie sauteuse. Manque juste une mallette mais vu que la lame est protégée par le carter, on peut la mettre dans une caisse quelconque sans que cela ne l'abime.Du pur bonheur!

Herramienta muy segura, fácil manejo y precisión. Excelente relación calidad-precio. El diseño de agarre y empuje está muy bien logrado.